Owning and Using a Reciprocating Saw | A Quick Guide For Your Own Benefit

If you have any material that does not have the hardness of a rock, the best reciprocating saw can cut through it. Because of that, a lot of tradespeople use this tool for a wide variety of projects, including remodeling, construction, and demolition. If you’re a new owner of a reciprocating saw, you might be surprised to know that it is capable of cutting through wood filed with nails. Aside from that, it can cut various metals, such as aluminum steel, cast iron, and copper, too. 

Owning and Using a Reciprocating Saw The Guide

Essential Extra Protective Equipment

Like any other equipment, handling a reciprocating saw is dangerous. With that said, you should be careful with your health and safety by employing specific safety procedures before, during, and after its usage. 

One essential equipment to invest in is eye safety equipment. It is best to purchase eyewear with an anti-fog coating to ensure you have a clear view of your surroundings. Debris from your cut material gets dislodged into the atmosphere, which can potentially hurt your eyes when operating your saw. As such, it is imperative to wear eye protection. A full-face shield is a better option because it also protects you from inhaling sharp debris that could cause lacerations in your respiratory system. 

Another thing to buy is a reliable pair of work gloves to protect your hands from the intense vibrations and abrasion of cutting materials. Gloves with an anti-slip coating help you have a firm grip on your stuff, which improves safety. 

The Basics of Reciprocating Saw Blades

The blade of your reciprocating saw is the most crucial element that makes or breaks your project. You should use the appropriate module meant for the material it should cut. Otherwise, you risk damaging your saw blade faster or end up with output that does not have smooth cuts. For more heavy-duty material, it is best to use the thick and fuller blades demolition blade. Avoid using smaller and weaker variants because you might damage them if you use them to cut heavy-duty materials.

For cutting metal, choose a saw blade with an above-average number of teeth, typically about ten teeth per inch, to make the cutting experience more aggressive and easier. For woodcutting, use a saw blade that is longer because it enables you to curve the edge so that you see the material getting cut.

Coarser blades with fewer teeth are the best options for cutting thicker metal. For more thinner metals, choose a module that has more teeth with softer blades. Apply lubricant to help reduce wear and tear on the edges to help lengthen its service life. However, that is not the case for other metals such as cast iron and cast aluminum.

Cast iron needs a diamond-grit blade to cut its surface safely and efficiently. If you’re cutting cast aluminum, invest in a carbide-tipped blade that can also cut through boards made of cement. If you have to cut through fiberglass and other quartz-based materials, a carbide-grit module is your go-to choice.

Conclusion

Using reciprocating saws is a massive responsibility. You should always wear protective equipment to ensure that there is no compromise in your safety. You should also remember to always use the appropriate saw blade for its corresponding material.

If you’re looking for the best reciprocating saw for your project, reach out to us. We have reliable tool reviews and buyer guides that will help you find what you need. If you have any questions, leave them in the comments section.

James Thomas

James Thomas

Tool Enthusiast

Leave a Comment

Your email address will not be published. Required fields are marked *