The 8 Best Table Saw Blades (A Complete Guide)

Last Updated on January 6, 2024 by Web Operator

Wheater you are a DIY enthusiast, carpenter, or contractor, having the right tools to get the job done is essential. As many professionals state, a good table saw is only as good as the blade you use.

Using the wrong blade could be disastrous in any project. If you go to any hardware store and look at the saw blades, you’ll see that there are tons of options, so which ones are the best?

I recently decided to tackle some DIY renovation projects in my home and let me tell you, finding a suitable blade for the different types of jobs was not easy.

After some research, I finally found the right types of blades for all the different projects I would be doing. I thought I would share all the best table saw blades I found while researching.

Best Table Saw Blades

The 8 Best Table Saw Blades

When you go searching for table saw blades, you need to keep in mind that different blades are made for various purposes. Some can be used for all your cutting needs, and others are specialized and used for specific jobs.

I have compiled a list of table saw blades for most of the projects that you will likely need a table saw to cut, starting with Forest Woodworker II Circular Saw Blade.

1. Forest Woodworker II Circular Saw Blade

This is the best overall blade. The Forest Woodworker II blade is a good investment as it is a combination blade and gives you the best of both a ripper blade and a crosscut blade. 

2. DeWalt 10-inch Miter/Table Saw Blades

This is the best bang for your buck. It is a set of two blades and fantastic quality for the price.

What makes this one of the top picks is that you get a ripper blade for cutting faster bigger pieces of wood, and you get a crosscutting blade for precision and smooth cuts. 

3. Freud 10-Inch X24T Heavy Duty Rip Blade (LM72R010)

This is the best flat tooth ripping blade. It is a 10-inch blade with four anti-vibration slots to allow for smaller cuts, and it helps to reduce wobbling. It is made of high-density carbide, which makes it strong enough to last longer and is suitable for hard and softwoods. 

4. Freud D1050X Diable 10-inch 50-Tooth Combo Saw Blade

This is the best combination saw blade. It has 50 teeth spread into groups of 5 that are angled just enough to give a fast ripping cut but precise enough to provide a smooth crosscut. 

The large gullets separating each set of teeth allow the blade to remove large amounts of wood when using it for ripping wood. Laser-cut stabilizers help trap vibration noise and help the blade stay cool to avoid the blade warping. 

5. Oshlun 8-inch 42 Tooth Stack Dado Blade

This is the best Dado blade. This blade is a 16-piece blade set that allows carpenters to cut, create and finish off projects with smooth edges.

This professional-grade C-4 carbide blade has a few different mixers to remove large amounts of material in less time; it has a mix of high-tooth-count saw blades for the fine smooth cut and shims for the fine-tuning groove width. The Tungsten carbide tips allow you to use it for softwood, plywood, and hardwoods.

6. Freud 10-inch x 80T Ultimate Cut-Off Saw Blade

This is the best crosscut saw blade. This Freud 10-inch saw blade is the 80 tooth blade which allows the best precision cuts so smooth that there will be no need for sanding after a cut. 

With laser-cut stabilizers that help trap vibration and noise, this blade will outlast most others in the same price class. 

7. Concord Blades WCB1000T030HP 10-Inch 30 Tooth TCT

This is the best blade for hardwood. This blade has 80 teeth and is a general-purpose saw blade, but it works best on hardwoods. It has a shallow angled blade that is designed with a thin kerf.

The thin blade allows for a more precise cut that will leave you with a smooth finish and little to no waste. It also has a lower hook angle that improves the surface quality of the cut. 

It is slow going on hardwoods with this blade, but your patience will be rewarded with a smooth cut every time. The only downside is that it wears out quickly if used for hardwoods only, but it’s is such excellent quality at such an affordable price it is one blade I would gladly replace.

8. Freud 10-inch X80T Ultimate Plywood Blade

This is the best plywood blade. This blade is mainly made to cut plywood and melamine. Because plywood tends to rip small chunks off when cutting and usually tears melamine, this blade will give you a clean cut that won’t tear and chip-free cuts. 

It has shallow gullets and a razor-thin blade that is a 0.98-inch kerf. This blade has anti-vibration slots to help reduce the wobble and will last longer due to the non-stick coating that will reduce blade drag. That makes your work easier as you won’t have to exhort so much force.

Different Types Of Saw Blades

Using Table Saw

Before you go off to the hardware store, you need to consider what type of table saw blades there are as different types of table saw blades for various applications. Here are the different types of blades you can take a look at.

Flat-Tooth Ripping Table Saw Blade

Flat-tooth blades are made to work with the grain of the wood, not against it. The flat tooth design helps rip through the most challenging pieces of wood in no time.

These table saw blades only have between 10 and 30 teeth with more severe angles of about 20-degrees. There are fewer teeth on ripping blades because fewer gullets make it easier to rip more material faster.

While a ripping blade is exactly what you need to easily rip through lots of material in a short amount of time, it can not be used for crosscuts as it leaves jagged edges behind and causes too much tear-out. 

Crosscut Table Saw Blade

Crosscut table saw blades were designed to make smooth and precise cuts. Crosscut table saw blades have between 60 and 80 teeth on an average 10-inch saw blade.

There are more teeth on a crosscut saw blade and fewer gullets because that allows it to make more cuts per revolution than a combination of ripping blades.

Because there are fewer spaces between the teeth of a crosscut blade, it removes less material and provides a smoother cut. That means it takes longer to cut through a piece of wood and makes the perfect blade to use when you need a smooth, clean, precise cut. 

Combination Table Saw Blade

Combination saw blades are general-purpose blades that allow you to make crosscuts or ripping cuts. Combination blades have between 40 and 50 teeth, finding a middle ground between a crosscut and ripping blade.

These are all-rounder blades for when you have to rip and crosscuts to do, and you don’t want to change blades in the middle of a project. It’s an excellent blade to use when you don’t need the speed of a ripping blade or the precision finish of a crosscut blade, like for home DIY projects. 

Dado Tabe Saw Blade

This specialty blade creates broad grooves in shelves, door panels, and drawers. You get two types of Dado blades, the stacked blade, and the wobble blade.

  • Stacked Dado blades are made up of different cutters to get a smooth and precise groove in the wood. It has cutters and spacers sandwiched together to create a broader profile. These blades have ripper-style blades and spacers on the inside and crosscut-style blades on the outside. The Stacked Dado blade removes significant amounts of material while keeping a smooth and precise cutline along the grooved edges.
  • Wobble Dado blades rotate in an offset pattern that cuts wide grooves as it spins through the wood. These blades include an adjuster so that you can change the width of the blade. Wobble Dado blades don’t cut as smooth and quick as a stacked dado blade, but they are much more affordable. 

What To Consider Before Buying A Table Saw Blade

Table Saw Blade Teeth

When you are standing in the aisle full of table saw blades, you get overwhelmed by all the different types of blades. If you have no idea what type to buy, here are a few factors that you need to keep in mind that will help you choose the correct blade for the job.

The kind of job you need the blade for

If you are doing a standard DIY job, you can get away with buying a combination blade. This blade will allow you to do ripping and crosscuts effectively and still have a clean edge.

It saves you the extra money you would have spent on a ripping blade and crosscut blade.

Crosscut, ripping, and dado blades are more for specialized projects and more common to use in carpentry. Most carpenters would need one of each kind of blade.

For example, a ripping blade to get through the more significant pieces faster and for hardwoods as it has the right amount of teeth and gullets to get through the tough hardwood without wearing out the blade.

They also need a crosscut blade for more precision cutting and a dado blade for the smooth, wide grooves.

The lade kerf or thickness

The kerf of a saw blade has to do with how long the blade will last. The standard kerf blade is 1/8-inches thick.

Most standard table saws can handle a blade this thick; however, if you have a table saw that has less than 3 horsepower, then getting a thinner blade is best. A table saw with less than 3 horsepower won’t have enough power to accommodate the 1/8-inch blade.

The only downside to a thinner blade is that it might warp or bend easily while cutting some wood types as it isn’t as thick, but with thin lighter pieces of wood, it allows for more precise and smoother cuts.

The length of a blade

Standard blades are 10-inches, and this is because smaller blades rotate faster and so provide more precise cuts. Bigger blades may cut deeper, but they tend to wobble or warp easier due to the length.

It is important to note using blades that are smaller in inches than your table saw is fine, but you should never put a blade bigger than a 10-inch on a 10-inch table saw.

Blade teeth and gullet configuration

The teeth and gullet spaces determine how a blade will cut a piece of wood. The ripper has flat teeth with bigger spaces that help rip through wood quickly and fast.

The crosscut has more teeth and less space, providing a more clean and precise cut. A combination blade offers a little of each, although not as neat or precise but suitable for standard DIY jobs. Dado blades offer teeth both ripper and crosscut teeth for a specialized type of cutting.


Buying a table saw blade is not as easy as one would think; besides the size, there are so many other considerations to think about. This list has some of the best table saw blades out there; you can do crosscut precision word, rip wood, and make detailed groovings if you choose the right blade.

Make sure you choose a blade that isn’t too big for your table saw, or the blade might get stuck in the wood, wobble, or break off. Thinner blades have the advantage of cutting smooth and clean cuts in hard and softwoods, but they do tend to wear out. So when choosing, try to find the blade that can do the job and last long.

Photo of author

Barry Gray

Hi, I’m Barry. I’ve loved woodworking and bringing things back to life for more years than I care to remember. I hope my passion for tools comes across loud and clear in everything you read here on The Tool Square.

Leave a Comment